$31,499
-
This LY6 crate engine makes max power and torque with a hydraulic cam which is very street able but also gives you the sound you are looking for!!
Peak Horsepower: 550bhp @ 6400 rpm
Peak Torque: 540lb/ft @ 4800 rpm
Compression Ratio: 11:1
Operating Range: 2300 – 6300rpm
Required Fuel: 91+ Octane Pump Gasoline
BLOCK SPECIFICATIONS
Block:
- Dart SHP Cast Iron Block
- Zero Decked
- Bored 4.030”
- Honed with Torque Plates and Pressure Washed
- New Durabond Cam Bearings Installed
- Line Honed
- ARP Main Studs
Pistons:
- Wiseco Boosted Forged pistons with Anti-Friction Coating
Bearings:
- King H-Series Main and Rod Bearings
Lifters:
- Johnson OE Hydraulic Roller
Covers:
- Oil Pan (GM Camaro, Corvette, GTO or Truck or Holley LS Swap)
- GM Timing Cover
- GM Rear Cover
- Motion Race Works Billet Lifter Valley Cover
- GM Valve Covers
Crank:
- Callies Comp Star 8 Counterweight 4340 Forged Steel
- 4.000” stroke
- Internally Balanced Front and Rear
Rods:
- Callies Comp Star Extreme Forged Steel H-Beam, ARP 2000 Bolts
- 6.125” Length
Rings:
- Mahle Plasma Moly
Camshaft:
- BTR Boost PD Stage 3 Billet Hydraulic Roller
Timing Sets:
- Cloyes Billet Roller with C5R Chain
Oil Delivery:
- Melling Select Performance High Volume
- GM Pick Up Tube
- GM Windage Tray
Gaskets:
- Cometic MLS Head Gaskets 6-Bolt
- GM Cover Gaskets
CYLINDER HEAD SPECIFICATIONS
Type:
- Golen Aftermarket LS Aluminum CNC Ported 6-Bolt
- Three angle performance valve job
Intake Valves:
- REV Stainless Steel 2.16”
Exhaust Valves:
- REV Stainless Steel 1.6”
Head Studs:
- ARP Performance Head Studs 6-Bolt
Intake System:
- Whipple 3.0L Super Charger in Black
- 102mm Nick Williams Billet DBW Throttle Body
- Bosch 100lb Uscar Fuel Injectors
EFI System:
- Holley Terminator X EFI
- Comes Tested and Tuned
- Remote Tune Support Included
- Auto Transmission Controller Available
- Delphi Ignition Coil Kit with Spark Plug Wires
Front Accessory Drive:
- Wegner Billet Front Super Charger Drive
- Dedicated Super Charger Belt, no slip
- Black Anodized with Diamond Cut (Polished Option Available)
- 170amp Alternator, Power Steering with Attached Res, AC Pump
Combustion Chamber:
- 70cc
Flow:
- 380CFM @ .600” Lift
Spring Kit:
- BTR Polished Double Valve Spring
- Light Weight Titanium Retainers and Hardened Locks
Rocker Arms:
- GM Factory 1.7 Ratio with BTR Trunion Upgrade Installed
Pushrods:
- Smith Brothers 5/16 .083” Wall Hardened
Ignition System:
- NGK Spark Plugs
Dyno Test Service:
- Run Engine for Full Break In and Power Test NA
- 2 Oil Changes using Joe Gibbs Break In Oil
- Graphs Listing HP, Torque and all Engine Vitals
Additional information
Weight | 500 lbs |
---|---|
Dimensions | 38 × 26 × 36 in |